WLC-22 Kenya: Managing Water Levels with the WLC-22 Controller
The WLC-22 uses probes to detect water levels in tanks and automatically control pumps. It prevents overflow and dry running by switching pumps ON or OFF based on water presence.
Introduction
Water storage systems are essential in homes, commercial buildings, and industrial facilities across Kenya. However, manually controlling water pumps often leads to common problems such as tank overflow, dry running of pumps, and wasted energy.
The WLC-22 Water Level Controller solves these issues by automating pump operation using simple sensing technology. It ensures that water tanks are filled and managed efficiently without constant human supervision.
You can explore related automation solutions on the Panel Tech Systems products page or learn more about system integration on the About page.
What is the WLC-22 Water Level Controller?
The WLC-22 is an automatic control device used to monitor water levels in tanks and control water pumps accordingly.
It works by using conductive probes placed at different levels inside a water tank. These probes detect the presence or absence of water and send signals to the controller.
It is commonly used in:
- Residential water tanks
- Commercial buildings
- Industrial water storage systems
- Borehole pumping systems
It integrates with low voltage panel systems for automated water control.
How Probes Work in the WLC-22 System
Probes are sensors placed inside the water tank that detect the presence of water.
They act as the “eyes” of the WLC-22 system, telling it when to turn the pump ON or OFF.
Types of Probes
A typical WLC-22 setup uses multiple probes:
- Common probe (reference point)
- Low-level probe (minimum water level)
- High-level probe (maximum water level)
These probes are installed at different heights inside the tank.
How Water Detection Works
- When water touches a probe, it completes an electrical circuit
- The controller detects this connection
- It interprets the water level based on which probes are active
- It sends signals to the pump system
This simple conductivity-based detection allows accurate water level monitoring.
Automatic Pump Control Logic
The WLC-22 automatically switches the pump ON or OFF based on probe signals.
This ensures tanks are always filled to the correct level without overflow or wastage.
Pump ON Condition
- Water level drops below the low-level probe
- Controller detects low water condition
- Pump automatically starts filling the tank
Pump OFF Condition
- Water reaches the high-level probe
- Controller detects full tank condition
- Pump automatically switches OFF
Protection Against Dry Running
The system also prevents pumps from running without water supply, which can damage motors and reduce lifespan.
Why Water Level Automation is Important
Automating water control improves system efficiency and prevents costly pump damage.
It ensures consistent water availability without manual monitoring.
Key Benefits
- Prevents tank overflow
- Prevents dry running of pumps
- Saves water and energy
- Reduces manual intervention
- Extends pump lifespan
Real-World Application in Kenya
In a residential apartment block in Nairobi, water is stored in overhead tanks supplied by a borehole system.
Before automation:
- Tanks often overflowed
- Pumps were left running unnecessarily
- Residents manually monitored water levels
After installing the WLC-22:
- Pump operation became fully automatic
- Overflow was eliminated
- Pump damage due to dry running was prevented
- Water management became efficient and reliable
For installation and support, visit our contact page.
System Specifications Table
| Parameter | Specification |
|---|---|
| Device Type | Water Level Controller |
| Model | WLC-22 |
| Detection Method | Conductive probes |
| Application | Water tank automation |
| Output | Pump control relay |
| Installation | Tank + control panel |
| Protection | Overflow & dry run prevention |
Integration with Electrical Systems
The WLC-22 integrates with:
- Water pumps
- Motor control panels
- Borehole systems
- Low voltage distribution systems
It is commonly used in automated water infrastructure setups across Kenya.
Learn more about integrated solutions on the Panel Tech Systems homepage.
Conclusion
The WLC-22 Water Level Controller provides a simple and reliable solution for managing water tanks automatically. By using probes to detect water levels, it ensures pumps operate efficiently, prevents overflow, and protects equipment from damage.
For Kenyan homes and facilities, it is an essential tool for modern water management.
Call to Action
Contact Panel Tech Systems Ltd
Powering Kenya's Future with Reliable Electrical Solutions
Email: [email protected]
Phone: 0799 531765
Location: Nairobi, Kenya
Website: https://paneltechsystems.co.ke/
Our Specialized Services:
Low Voltage (LV) Panels & APFC Panels
VFD Drive Solutions & ATS / MTS Systems
Solar Power & EV Charging Infrastructure
Electrical Supplies & Engineering Consultations
